How to start an HVAC apprenticeship program as a contractor
An unregistered helper can't touch a refrigerant circuit without a 608 card. A registered apprentice can. Here is how a contractor writes, registers and runs an HVAC apprenticeship in 2026.

Here is how to start an HVAC apprenticeship program: write apprenticeship standards (HVAC work processes, a wage schedule and a related instruction plan), then register them with the Department of Labor's Office of Apprenticeship or your State Apprenticeship Agency. Pick a time-based model (at least 2,000 hours on the job), competency-based or hybrid. DOL recommends 144 hours of related instruction a year, and it can be delivered online with approval.
Related instruction is the part most contractors struggle to run themselves, and it is where LMS Advisor, our top pick for the related instruction layer, fits. You set up one course per apprenticeship year, hold evening classes on Zoom or Google Meet with attendance, give proctored end-of-level exams in the Test Center and export the results for your sponsor records. On-the-job hours stay in your apprenticeship tracking system.
Below are the five steps in order, with the rules behind each one and the decisions we see contractors get stuck on.
Why do HVAC contractors register apprenticeships?
Three reasons come up again and again: hiring, refrigerant rules and state licensing.
Demand for technicians
The BLS Occupational Outlook Handbook says HVAC mechanics and installers "held about 440,900 jobs in 2025," that employment "is projected to grow 11 percent from 2025 to 2035," and that there are about 40,600 openings each year. A contractor who only hires experienced techs is bidding against every other shop for the same people. An apprenticeship grows them in-house.
The EPA 608 exemption only covers registered apprentices
This is the HVAC-specific reason, and the one most "helper" programs miss. Under 40 CFR 82.161, an apprentice may work on refrigerant circuits without Section 608 certification "provided the apprentice is closely and continually supervised by a certified technician." But 40 CFR 82.152 defines an apprentice as a person "currently registered as an apprentice" with the DOL Office of Apprenticeship or a recognized State Apprenticeship Council. An informal trainee does not qualify and needs their own 608 card first. We cover the rest of the rule in EPA 608 requirements for HVAC companies.
State pathways such as Texas
Some states build apprenticeship into licensing. In Texas, 16 TAC 75.122 says a certification training program provider "must receive approval from the department before offering or providing a certification training program." Those programs need at least 2,000 hours combining classroom instruction (at a secondary school, an institution of higher learning or an apprenticeship program) and practical experience under a licensed ACR contractor, and the approval "is valid for one year, and may be renewed." Check your own state's licensing board for how apprenticeship hours count.
Step 1: choose a model and a sponsor structure
Individual employer or group sponsor?
A single contractor can sponsor its own program. Smaller shops often join a group program run by an association chapter or a local instead, so the chapter handles registration, curriculum and paperwork while each employer provides the job site training. If you have fewer than a handful of apprentices a year, ask your local ACCA, PHCC or ABC chapter what already exists before you write your own standards.
Time-based, competency-based or hybrid
Under 29 CFR 29.5(b)(2), the term of the apprenticeship is measured by "on-the-job learning (at least 2,000 hours) (time-based approach), the attainment of competency (competency-based approach), or a blend." Time-based is the easiest to administer: count hours, move apprentices up a level. Competency-based lets a fast learner move on when a supervisor signs off a skill, which suits techs who arrive from a trade school. Hybrid sets minimum hours per level plus demonstrated skills, and it is what we would choose for most HVAC contractors.
What did the March 2026 DOL circulars change?
The guidance, not the regulation. On March 9, 2026, DOL announced Circular 2026-01 on program design across time-based, competency-based and hybrid approaches, Circular 2026-02 on state agency and council roles, Circular 2026-03 on completion-rate calculation and a data portal, and Bulletin 2026-35, which commits to "making final apprenticeship determinations within 30 days of receiving registrations." The stated goal is one million active apprentices. The text of 29 CFR part 29 did not change.
Step 2: write the standards
Standards are the document you register. Your apprenticeship training representative (ATR) or state agency will usually have a template. Four parts take most of the work.
Work process schedule for HVAC tasks
This lists the skills an apprentice learns on the job and roughly how many hours go to each. For a residential and light commercial contractor, an outline might be:
- Safety, tools, ladders and rooftop fall protection
- Electrical fundamentals, meters and control wiring
- Refrigeration cycle, charging and recovery (under a certified tech until the apprentice holds 608)
- Equipment installation, line sets, brazing and startup
- Heat pumps, A2L refrigerants and sensors
- Gas heating, combustion and venting
- Airflow, ductwork and indoor air quality
- Service calls, diagnostics and customer communication
Base the list on the work your techs actually do. A commercial contractor adds chillers, rooftop units and building controls. Our post on A2L refrigerant training requirements covers what to put in the A2L block.
Wage progression
29.5(b)(5) calls for "a progressively increasing schedule of wages to be paid to the apprentice consistent with the skill acquired," with an entry wage no lower than the applicable minimum wage. Many sponsors write each step as a share of the fully qualified technician's rate. Tie each raise to something you can verify: a completed year of related instruction, a passed end-of-level exam, the hours or competencies for that level.
Related instruction plan and the 144 hours
29 CFR 29.5(b)(4) says "a minimum of 144 hours for each year of apprenticeship is recommended" for related instruction. It "may be accomplished through media such as classroom, occupational or industry courses, electronic media, or other instruction approved by the Registration Agency." The standards should say who delivers it, in what format and how it is tested.
Progress records
29.5(b)(6) requires "periodic review and evaluation of the apprentice's performance on the job and in related instruction; and the maintenance of appropriate progress records." Decide now where each record lives: OJT hours and supervisor sign-offs in one place, related instruction attendance and exam scores in another, and a way to bring them together at review time.
Step 3: pick your related instruction
You can buy it, send apprentices to a school or build your own. Here is how the options compare, as of September 2026.
| Option | What it looks like | Watch for |
|---|---|---|
| Your own courses in LMS Advisor (our platform) | One course per year with your content and your equipment, live evening classes with attendance, proctored end-of-level exams, certificates per level | You write or source the curriculum, and your registration agency approves the plan |
| PHCC Academy HVACR Apprenticeship | Four-year online program. "Each course level equals one year of classroom instruction, or 156 hours." Enrollment through state chapters | Tests are closed-book on an honor system with a 70 percent pass mark, and each course has a 12-month completion window |
| Community college or trade school | Classroom and lab hours on the school's calendar | Schedules may not match your busy season |
| Interplay Learning | 3D simulation courses with an optional VR headset, 80+ courses including NATE prep and EPA 608 readiness | Supplemental content, not a registered curriculum on its own |
PHCC notes that DOL recognizes its program as "a reasonable option" for apprentice training. Many contractors mix: a purchased curriculum for theory plus their own company courses for brands, paperwork and service standards. For trade schools running the classroom side, see our guide to the best LMS for trade schools and career colleges.
Online and hybrid delivery
Online related instruction is allowed with your agency's agreement. Apprenticeship.gov's page on delivering apprenticeships virtually tells sponsors to "contact your local apprenticeship training representative (ATR) to discuss making alterations to the program implementation" and to "consider using a learning management system or other online platforms to provide instruction to apprentices, where appropriate." Put the delivery format in your standards from day one, so you are not asking permission later.
Step 4: register and recruit
Submit the standards to the DOL Office of Apprenticeship or, in states that run their own system, to the State Apprenticeship Agency. Under Bulletin 2026-35, DOL aims to make final determinations within 30 days of receiving a registration. Then register each apprentice. That second registration is what triggers the 608 exemption, so do not let a new hire start refrigerant work before it is done.
For recruiting, look at the pipelines you already have: high school career and technical programs, trade school graduates, your own helpers and warehouse staff, and veterans. A short pre-apprenticeship course on safety and tools can double as a screening step.
Step 5: run the program and keep records
| Item | Requirement or guidance | Source |
|---|---|---|
| Program term | At least 2,000 hours of on-the-job learning (time-based), competency-based or hybrid | 29 CFR 29.5(b)(2) |
| Related instruction | 144 hours a year recommended, electronic media allowed if approved | 29 CFR 29.5(b)(4) |
| Records | Periodic review and appropriate progress records | 29 CFR 29.5(b)(6) |
| Refrigerant work | Registered apprentices may work under close supervision of a certified tech | 40 CFR 82.161 |
| Registration speed | DOL aims for final determinations within 30 days | DOL Bulletin 2026-35 |
| Texas option | TDLR-approved certification training program of at least 2,000 hours | 16 TAC 75.122 |
Status as of September 2026.
OJT hours and supervisor sign-off
The experienced technician who supervises the apprentice signs off hours and skills. For refrigerant work that person must hold the right 608 type, and EPA's Section 608 Q&A says supervision must be close and continuous. Pair each apprentice with a named mentor and write that pairing down.
Related instruction attendance, exams and certificates
Record attendance for every class, test at the end of each level, and keep the score and the date. An exam taken at home on the honor system is easy to run and hard to defend if a dispute comes up about why an apprentice did not advance.
Annual review
Once a year, sit down with each apprentice's hours, exam results and mentor notes. Update the work process schedule when your equipment changes. The A2L transition is a good example of content that did not exist when many current standards were written.
How to run HVAC related instruction in LMS Advisor
LMS Advisor is our platform, so weigh that, but it fits this layer of an apprenticeship well. Here is how the steps above map:
- One course per year. Sections for each topic, sequential progression and lesson minimum time, so apprentices cannot skip ahead. Recording Studio and interactive video turn a senior tech's startup or diagnostic walkthrough into a lesson.
- Evening classes. Live sessions on Zoom or Google Meet with attendance taken by hand or by QR check-in, as on our virtual classroom page.
- End-of-level exams. Test Center exams with question pools, image hotspot items on wiring diagrams and native proctoring (lockdown, webcam snapshots, ID photo capture), instead of the honor system.
- Certificates per level. Issued automatically on completion or pass, with a public verification page.
- Records out. CSV, Excel or PDF exports, plus webhooks on completion and certificate issue to feed your OJT tracking system.
The limits: LMS Advisor does not log OJT hours, does not file with RAPIDS or your state agency and has no ready-made HVAC curriculum. Your apprenticeship tracking tool and registration agency handle those. Our plumbing apprenticeship LMS guide walks through the same setup for a sister trade, and the HVAC training software page covers the rest of a contractor's training. To test it with one cohort, start with LMS Advisor and build year one.
Frequently asked questions
How long is an HVAC apprenticeship?
It depends on the model. A time-based registered program needs at least 2,000 hours of on-the-job learning, and many HVAC programs run several years. PHCC Academy's online HVACR related instruction, for example, is four levels of one year each.
How many hours of related instruction does an HVAC apprentice need?
DOL recommends at least 144 hours for each year of apprenticeship under 29 CFR 29.5. Your registered standards set the actual number. Some programs, such as PHCC Academy's at 156 hours a level, go beyond the recommendation.
Can HVAC apprenticeship classes be online?
Yes, if your registration agency approves it. The regulation allows electronic media, and Apprenticeship.gov suggests using a learning management system where appropriate. Talk to your apprenticeship training representative and write the format into your standards.
Can an HVAC apprentice work on refrigerant without EPA 608?
Only a registered apprentice, and only under close and continual supervision by a technician with the right 608 certification. An unregistered trainee needs their own 608 card before doing work that could release refrigerant.
Can LMS Advisor run related instruction for an HVAC apprenticeship?
Yes, once your registration agency accepts the delivery plan. LMS Advisor runs courses per year, live classes with attendance, proctored end-of-level exams and certificates, and exports the results. It does not track OJT hours or report to RAPIDS, so pair it with your apprenticeship tracking system.
Add lmsadvisor.com as a preferred source on Google, or open this article in your AI assistant to use it as a source.
