Internal training: 22 types and how to run them
Internal training is training conducted within the organization by its own employees, managers or subject matter experts. This guide defines the 22 common types, shows who should deliver each, and explains how to keep it consistent and recorded.
Key takeaways
- Internal training is delivered by your own people, so it fits knowledge that is specific to your company: products, processes, systems and rules.
- The 22 common types run from employee onboarding and SOP training to cross-training, mentoring and change management.
- Its strength is relevance and low cost per learner. Its weakness is consistency, because each manager teaches a little differently.
- Record the core content once, test it with a short quiz, and leave the live time for questions and practice.
- Give every internal program an owner, a review date and a record of who completed it.
Internal training is training conducted within the organization by its own employees, managers or subject matter experts. It teaches what only your company knows: how your products work, how your processes run, which systems you use and which rules you follow. The 22 common types range from employee onboarding to change management training.
This guide is written by the LMS Advisor team. LMS Advisor is our own product, and the section near the end shows how internal training runs in it, with its limits. The rest applies to any company and any system.
What is internal training?
Internal training is any structured learning that your own people design and deliver to colleagues. The trainer might be a line manager, a senior technician, an HR partner or a product specialist. The setting might be a meeting room, the shop floor or a course in your LMS.
It is the opposite of external training, where an outside trainer, vendor or institution delivers the content. The delivery method is a separate choice. Internal training can be virtual, face-to-face or blended.
What are the 22 types of internal training?
The 22 types below cover almost every internal program we see. The third column says who usually owns each one.
| Training type | What it is | Usual owner |
|---|---|---|
| Employee onboarding | The program that takes a new employee from offer to productive, often over 30 to 90 days. | HR with the line manager |
| New hire orientation | The first days: company culture, policies, procedures and introductions. | HR |
| Job-specific training | The skills and tasks required for one particular role. | Line manager |
| Technical skills training | Software, IT tools and technical knowledge needed for the work. | IT or a senior specialist |
| Soft skills training | Communication, teamwork, time management and similar people skills. | L&D |
| Leadership training | Developing the ability to set direction and lead others. | L&D with senior leaders |
| Management training | Running a team day to day: planning, delegating, reviewing and hiring. | L&D with HR |
| Product knowledge training | How the company's products and services work and who they are for. | Product team |
| Process training | How an internal workflow runs from start to finish. | Process owner |
| SOP training | The exact steps of a standard operating procedure, and proof each person has read and understood it. | Quality or operations |
| Compliance training | Company rules and the regulatory requirements that apply to staff. | Compliance or legal |
| Workplace safety training | Hazards, safe working methods and what to do in an emergency. | Health and safety |
| Cybersecurity awareness | Protecting company systems and data: phishing, passwords, devices. | IT security |
| Data privacy training | Handling personal and sensitive information lawfully and securely. | Privacy or legal |
| Sales training | The company's sales process, pitch, pricing and tools. | Sales enablement |
| Customer service training | Handling customer questions, complaints and escalations. | Support manager |
| Performance improvement training | Targeted training to close a gap found in a review or a metric. | Line manager |
| Cross-training | Learning the responsibilities of another role so teams can cover for each other. | Line managers |
| Mentoring and coaching | Regular one-to-one guidance from a more experienced colleague. | Mentor, supported by HR |
| Departmental training | Knowledge that only one department needs, such as finance close or lab methods. | Department head |
| Internal knowledge sharing | Sessions where teams share what they have learned, such as lunch and learns. | Any team |
| Change management training | Preparing people for a new system, structure or way of working. | Project or change lead |
When is internal training the better choice?
Internal training is the better choice when the knowledge is specific to your company and somebody inside already knows it well. No outside provider can teach your refund policy or your production line better than the people who run them.
Choose internal when:
- The content is about your own products, processes, systems or policies.
- It changes often, and you need to update it the same week.
- Many people need it, so the cost of building it once is spread widely.
- Confidential details are involved that you would not share with a supplier.
Choose external when the learner needs a credential that only an outside body can award, or when the skill is new to the whole company. Most organizations run both.
How do you onboard and orient new employees?
Split it into orientation, which covers the first days, and onboarding, which runs until the person is productive. Orientation is the same for everyone. Onboarding differs by role.
A structure that works for most roles:
- Before day one. Send the welcome, the schedule and any short policy lessons that need no system access.
- Week one, orientation. Culture, policies, security basics, tools and introductions. Keep the lessons short and end each with a quick check.
- Weeks two to four, job-specific training. Product knowledge, the main processes and the SOPs for the role, mixed with shadowing a colleague.
- Days 30 to 90, practice and sign-off. Real tasks with a mentor, then a manager review against a checklist.
The mistake we see most is putting all of it into the first two days. People remember little of it. Spread the lessons out and release them when they become relevant. Our employee onboarding page shows this as a learning path.
How do you run SOP, process and compliance training?
Treat these three as controlled content: one current version, a named owner, an assigned audience, a due date and a record of who completed it. They are the internal training types an auditor is most likely to ask about.
Some of it is required by law. In the United States, HIPAA requires covered entities to train all workforce members on their privacy policies and procedures (45 CFR 164.530(b)). In the EU, the GDPR lists awareness-raising and training of staff among the data protection officer's tasks (Article 39). Check which rules apply to you before you set the frequency.
For each SOP or policy, keep the document and the training together. When the SOP changes, the course changes and the affected people are assigned again. A short quiz after the reading is stronger evidence than a tick box. Our compliance training page and the IT compliance guides go further on what each standard expects.
How do you train skills: technical, soft, sales and service?
Teach the knowledge part online and the practice part with a person. A skill is not learned until someone has tried it and been corrected.
- Technical skills. Screen recordings of the real system, followed by a task the learner completes and submits.
- Soft skills. A short lesson on the model, then role-play in a live session. Branching scenarios let people practice a difficult conversation alone first.
- Sales training. Product knowledge and pricing as self-paced lessons, pitch practice recorded or live, then a certification quiz. See sales enablement training.
- Customer service training. Real tickets and calls as examples, with a knowledge check on policy and tone.
- Product knowledge. One short lesson per product or feature, updated at each release.
How do you develop leaders and managers internally?
Run leadership and management training as a program over months, not as a single course. New managers need the basics quickly (one-to-ones, feedback, delegation, the review process) and then practice with support.
A common internal design is a cohort: six to ten new managers start together, take a short online module every two weeks, meet for a live session to discuss real cases, and each has a mentor. Senior leaders teach one session each, which costs little and carries weight. Many companies add an external leadership program for senior roles.
How do cross-training, mentoring and knowledge sharing work?
These are the least formal internal types, and they fail quietly when nobody tracks them. A light structure is enough.
- Cross-training. List the tasks each role must cover, pair people, and record who can now do what. A simple skills matrix or training matrix does the job.
- Mentoring and coaching. Set a length (often six months), a meeting rhythm and two or three goals. Check in once at the midpoint.
- Departmental training. Keep each department's own courses in its own category, owned by the department head.
- Internal knowledge sharing. Record the session. A 30-minute talk that 12 people attended becomes a lesson the next 200 hires can watch.
- Performance improvement training. Tie it to one measurable gap and agree the measure before the training starts.
- Change management training. Train just before go-live, not a month earlier, and keep short how-to lessons available afterward.
What goes wrong with internal training?
Four problems come up again and again, and each has a plain fix.
| Problem | What it looks like | Fix |
|---|---|---|
| Inconsistent delivery | Each site or manager teaches a different version. | Record the core content once and reuse it everywhere. |
| Expert overload | The same specialist repeats one session every month. | Capture the session as a course. Keep the expert for questions. |
| Stale content | The course still shows last year's screen or policy. | Give every course an owner and a review date. |
| No record | Nobody can prove who was trained. | Track completion, score and date per person in one system. |
How does LMS Advisor support internal training?
LMS Advisor gives internal trainers a place to build the course once, assign it and see who has finished. These are the parts internal teams use most:
- Authoring. Courses built from video, audio, PDF and documents, rich text and interactive modules. The module studio has templates for onboarding welcome, policy briefing, compliance refresher, product training, software how-to, safety briefing, soft skills and change announcement.
- Capturing experts. The Recording Studio records camera, screen or both, and saves to the Media Library for reuse.
- AI drafting. AI can draft a course outline, lessons and quiz questions from your material. Drafts are never published automatically, so the subject expert reviews them first.
- Assigning. Organization course assignments with due dates and mandatory flags, and auto-enrollment rules that match department, job title or location. HR sync with BambooHR, Zoho People, Keka or a CSV upload creates accounts for joiners.
- Following up. Deadline reminder emails, a weekly digest of overdue mandatory training for managers, and a My Team view of direct reports.
- Proof. Certificates with expiry and renewal, a transcript per learner and CSV, Excel or PDF exports.
Where it does not fit: there is no ready-made course library, so your team supplies the content. There is no skills matrix or competency framework, and no dedicated mentoring module, so mentoring pairs are managed outside the LMS or as a simple course with live sessions.