Competent person training: what OSHA requires and what it does not
OSHA has never issued a competent person card, and a course certificate alone does not make one. Here is what the rules require, where 1926 names the role and how to designate one you can defend.

OSHA does not certify competent persons, and no construction standard sets a required course, number of hours or card for one. Under 29 CFR 1926.32(f), a competent person is someone capable of identifying existing and predictable hazards who has the employer's authority to take prompt corrective measures. Training builds that capability, but the employer must assess the person, designate them and be able to show why.
In LMS Advisor you can test the capability part: a proctored Test Center exam with image hotspot questions on your own trench and scaffold photos shows whether a candidate spots the hazard, and the exam result, the field walk-through attendance and the course certificate give you exportable evidence to file with your written designation.
So competent person training requirements are mostly yours to set: what you teach, how you assess and what you write down. Below is what the definition means word by word, what OSHA's 2005 scaffold letter says about courses and cards, where Part 1926 names a competent person, and a designation process that holds up when an inspector asks, "Why is this person your competent person?"
What is a competent person under OSHA?
The construction definition in 1926.32(f) reads: "Competent person means one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them." That is two tests, and a person has to pass both.
Capable of identifying existing and predictable hazards
"Existing" is what is in front of you: a spoil pile at the trench lip, a missing midrail, a saw cutting without water. "Predictable" is what the next rain, the next lift or the next pour will bring. OSHA's competent person overview adds that, "By way of training and/or experience, a competent person is knowledgeable of applicable standards, is capable of identifying workplace hazards relating to the specific operation, and has the authority to correct them."
Note "the specific operation." Competence is not a general rank. Your best scaffold foreman is not automatically your excavation competent person, and the reverse is also true.
Authorization to take prompt corrective measures
The second test is about authority, and only the employer can give it. OSHA's June 17, 2005 letter on competent persons under the scaffold subpart says a course cannot supply the authority to take prompt corrective action, because that authority "can only be provided by the employer." In practice that means the person can stop work, pull a crew out of a trench or red-tag a scaffold without calling the office first.
Competent person vs qualified person
The two terms get mixed up constantly, and some standards use both.
| Competent person, 1926.32(f) | Qualified, 1926.32(m) | |
|---|---|---|
| Core test | Can identify existing and predictable hazards | Has "successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the work, or the project" |
| How they get there | Training and/or experience in the specific operation | "a recognized degree, certificate, or professional standing," or "extensive knowledge, training, and experience" |
| Authority | Must be authorized by the employer to correct hazards | No authority element in the definition |
| Typical example | Excavation inspections, training scaffold erectors, fall protection training | Training scaffold users, steel erection training |
A useful shorthand: the qualified person knows how to solve the engineering or technical problem, and the competent person sees the hazard on site and has the power to stop it.
Does a competent person need a card or certificate?
No. OSHA's rules and its competent person overview describe no card. The 2005 letter is the clearest statement: "The standard does not specify particular training requirements for competent persons. Instead, it defines a competent person in terms of capability." It also says "successful completion of a course does not, alone, necessarily establish an individual as a 'competent person'."
That does not make courses worthless. A good excavation or scaffold course is a solid way to cover the standard, soil classification or load ratings, and the certificate is useful evidence of what the person was taught. What it cannot show is the two things the definition turns on: that this person recognizes hazards on your jobs, and that you gave them authority. When a training provider sells a "competent person certificate," read it as "completed a competent person course."
The same logic applies to online delivery. We covered what OSHA's letters say about online safety training in is online OSHA training acceptable?, and it matters here because hazard recognition is the part a slide deck teaches least well.
Where do OSHA construction standards call for a competent person?
Many Part 1926 standards use the term. These are the ones we checked against OSHA's text in September 2026 and that most general and specialty contractors run into. It is not an exhaustive list.
| Standard | Competent person role | What the text says |
|---|---|---|
| 1926.20(b)(2) General | Frequent and regular jobsite inspections | Inspections "to be made by competent persons designated by the employers" |
| 1926.651(k)(1) Excavations | Daily inspections of excavations, adjacent areas and protective systems | Before work starts, as needed during the shift, and after every rainstorm or other hazard-increasing event |
| 1926.454(b) Scaffolds | Trains workers who erect, disassemble, move, operate, repair, maintain or inspect scaffolds | Those employees must be "trained by a competent person" |
| 1926.503(a) Fall protection | Delivers fall protection training | Each employee trained "by a competent person qualified in the following areas" |
| 1926.1060(a) Ladders and stairways | Delivers ladder and stairway training | Training by a competent person |
| 1926.1153(g)(4) Silica | Implements the written exposure control plan | "frequent and regular inspections of job sites, materials, and equipment" |
For the full picture of who trains and what record each standard needs, see our table of OSHA construction training requirements. If the competent person also trains crews on fall protection, the fall protection training requirements post covers the certification record that training needs.
What does an excavation competent person have to do?
Excavation is where the role is busiest. Under 1926.651(k)(1), "Daily inspections of excavations, the adjacent areas, and protective systems shall be made by a competent person," with an inspection "prior to the start of work and as needed throughout the shift," and "after every rainstorm or other hazard increasing occurrence."
OSHA's trenching and excavation eTool lists what that person must be able to do, including:
- Classifying soil "by visual analysis and by testing" to decide on protection.
- Determining cave-in potential and the need for shoring or another protective system.
- Authorizing "immediate removal of employees from the hazardous area where evidence of possible cave-in" or other hazardous conditions exists.
Two practical points follow. The inspection schedule means a competent person has to be on site, or close enough to inspect, every day the trench is worked, including after an afternoon storm. And soil classification by testing is a skill you verify by watching someone do it, not by a written answer.
How to designate a competent person you can defend
If an inspector or an attorney asks why a foreman was your competent person, "he took a course" is a weak answer. This process gives you a better one.
1. Assess knowledge of the standard and the site
Pick candidates with real field experience in that operation. Train them on the standard and on your own procedures, such as your trench box tabulated data, your scaffold tagging system or your silica exposure control plan. Teach it in a language and vocabulary they understand, which OSHA's 2010 training policy statement requires of any training.
2. Test hazard recognition, not recall
A question like "What is the maximum slope for Type C soil?" tests memory. A photo of a real trench with a spoil pile at the edge and water in the bottom, where the candidate has to find the problems, tests the capability the definition names. Use several photos from your own jobs, vary them between attempts, and set a pass mark. Our certification exam blueprint guide shows how to weight questions by task.
Then do a field check: the candidate walks a live site with an experienced assessor, points out hazards and explains what they would do.
3. Write the designation and the authority
A one-page designation letter does most of the work. Include:
- The person's name and the operation (excavation, scaffolds, silica, fall protection training).
- The sites or projects the designation covers.
- The training completed and the assessment results, with dates.
- The authority granted, in plain words: stop work, remove workers, require corrective action.
- The date, and the signature of the person granting it.
4. Tell crews who it is
Workers need to know who to go to, and for silica it is written into the rule: under 1926.1153(i)(2)(i)(E), each covered employee must be able to demonstrate knowledge of "The identity of the competent person designated by the employer." Post the name at the site and cover it in the orientation. Our construction site orientation software guide shows how to build that into a subcontractor orientation.
How do you keep competent person designations current?
OSHA sets no renewal cycle, so this is your policy. We'd tie it to three things:
- New project, new hazards. A competent person for shallow utility trenches in clay may not be ready for a deep excavation in sand next to a live road. Review the designation when the work changes.
- A fixed re-assessment interval. We'd re-test annually or every two years with fresh photos. It catches drift and it gives you a recent date on file.
- After an incident or a near miss. If something was missed on their site, re-assess before the next job.
Keep the training, the assessment result, the field check notes and the signed designation together per person. When those four live in different places, nobody can produce them the day they are asked for.
How to run competent person assessments in LMS Advisor
LMS Advisor will not designate anyone. The authority comes from you. What it does is hold the training and the evidence of capability, and keep re-assessment dates visible.
- Training per operation: one course each for excavation, scaffolds and silica, with interactive video (timestamped questions, chapters) and scored knowledge checks. Film your own sites with the Recording Studio.
- Hazard recognition exam: a Test Center exam with image hotspot questions on your trench and scaffold photos, drawn from question pools with difficulty levels so you can vary questions between attempts.
- Proctoring: native proctoring set per exam, with ID photo capture, webcam snapshots, face monitoring and fullscreen lockdown, plus an evidence trail if a result is disputed. See native proctored exams.
- Field check: a live session lesson with QR check-in, with the assessor as instructor, records who attended the site walk.
- Record and renewal: a course certificate with a public verification page, audit logs and exports. Exam certificates can carry a validity too, but renewal by retake is built around course certificates, so for a re-assessment cycle put a final quiz inside a course and give the course certificate a 12 or 24-month validity. Course quizzes support fewer question types than Test Center exams and proctoring is set on exams, so confirm in a demo whether your hotspot items and proctoring carry over. The course certificate shows an expiring-soon status in the last 30 days and an email rule warns before expiry.
The limits. There is no ready-made competent person course in LMS Advisor, the signed designation letter stays in your own files, and a proctored exam proves the candidate answered alone, not that they can read soil on a real site. That still takes the field check. The construction safety training software guide and our construction LMS page show the wider setup. To try the photo-based exam with your own images, request a demo of LMS Advisor.
Frequently asked questions
Does OSHA certify competent persons?
No. OSHA defines a competent person by capability and authority, not by a card. The employer decides who meets the definition and grants the authority to correct hazards.
How many hours of training does a competent person need?
OSHA sets no hours. Its 2005 letter says the standard "does not specify particular training requirements for competent persons." Train until the person can identify the hazards of the specific operation, then assess that capability.
Can any employee be a competent person?
Only if they can identify existing and predictable hazards in that operation and the employer gives them authority to take prompt corrective action. A new hire with a course certificate but no field experience or authority does not meet the definition.
What is the difference between a competent person and a qualified person?
A competent person identifies hazards on site and has authority to correct them. A qualified person has a recognized degree, certificate or professional standing, or extensive knowledge and experience, and has shown they can solve technical problems in the subject. Some standards require one, some the other, and some both.
Does a competent person card from an online course satisfy OSHA?
Not by itself. OSHA has said completing a course does not alone establish someone as a competent person. The card is useful evidence of training, but you still need to assess the person and designate them in writing.
Can LMS Advisor track competent person assessments?
Yes. LMS Advisor runs proctored exams with image hotspot questions on your own jobsite photos, records field check attendance by QR check-in and issues course certificates with an expiry date for re-assessment. The designation and the authority still come from the employer.
Add lmsadvisor.com as a preferred source on Google, or open this article in your AI assistant to use it as a source.
